Broward County · Service Area

Licensed general contractor working
Coral Springs, FL.

Coral Springs is where multiple reviewers on our Google profile live. Renovations, additions, and full home systems upgrades on 30-year-old inventory that needs re-pipe / re-wire / new HVAC.

What we build most in Coral Springs

The scopes that show up on our Coral Springs calendar most often.

01Local pattern

Whole-house re-pipe and re-wire

02Local pattern

HVAC replacement + duct modernization

03Local pattern

Kitchen & bath modernization

All 18 scopes · available in Coral Springs

Every service, under one general contract, in Coral Springs.

01 · Interior + Structural

Custom Home Building

Ground-up custom residences from architectural coordination through final walkthrough.

Explore →
02 · Interior

Home Remodeling

Whole-home renovations and major layout changes.

Explore →
03 · Interior + Structural

Home Additions

Second-story additions, room extensions, in-law suites, and pool-house builds.

Explore →
04 · Interior

Kitchen Remodeling

Fully permitted kitchen renovations. Fixed price at signing.

Explore →
05 · Interior

Interior Renovation

Full-interior remodels beyond a single room.

Explore →
06 · Exterior

Outdoor Kitchens

Built-in grills, hood ventilation, refrigeration, stone counters, gas lines.

Explore →
07 · Exterior

Exterior Living Spaces

Kitchens, pergolas, hardscapes, pool decks, and lighting designed together.

Explore →
08 · Exterior + Structural

Pergolas & Shade Structures

Custom pergolas, cabanas, and shade structures built to South Florida wind code.

Explore →
09 · Exterior

Hardscapes & Paver Patios

Paver patios, pool decks, driveways, retaining walls, and stone features.

Explore →
10 · Exterior + MEP

Pool Construction

New pool builds and pool-area renovations coordinated with hardscape, plumbing, electrical.

Explore →
11 · Mechanical + Electrical + Plumbing

Home Systems

Whole-house mechanical, plumbing, and electrical upgrades.

Explore →
12 · Mechanical + Electrical

Generator Installation

Standby generators sized to your home’s actual load — not oversold.

Explore →
13 · Electrical

Electrical Contracting

Panel upgrades, service changes, EV chargers, code corrections.

Explore →
14 · Plumbing

Plumbing Contracting

Rough-in and finish plumbing for renovations, additions, new construction, plus gas.

Explore →
15 · Roofing

Roofing

Re-roofs, roof repairs, and new-construction roof systems.

Explore →
16 · Umbrella

General Contracting

The umbrella that covers every scope above.

Explore →
17 · Commercial

Commercial Construction

Ground-up commercial builds and major renovations across South Florida.

Explore →
18 · Commercial

Tenant Fit-Outs & Build-Outs

Restaurant, retail, office, and medical build-outs delivered under one general contract.

Explore →
Coral Springs homeowners · one contract

Fixed-bid estimate on your Coral Springs project.

Tell us about the project. You’ll hear back promptly with a walk-through scheduled in Coral Springs and a path to a written proposal.

Coral Springs Contractor with All Five Florida Trade Licenses

Dellamano Construction handles every permitted scope in Coral Springs under one contract — from whole-house re-pipe and HVAC replacement to kitchen remodels, additions, and pool builds.

What Makes Coral Springs Projects Different

Coral Springs was built out heavily in the 1970s through early 1990s, which means the overwhelming majority of its single-family homes are now 30-plus years old. That age bracket brings a predictable cluster of needs: polybutylene or galvanized supply lines that have reached end-of-life, original panel boxes undersized for modern loads, and duct systems that pre-date current Manual J calculations. Most remodel scopes we open in Coral Springs expose at least one of these conditions behind the walls, which is exactly why Broward County permit reviewers expect general contractors here to carry plumbing and mechanical licenses alongside the CGC — not just coordinate subs.

Coral Springs also sits in a high-wind design zone under Florida Building Code, meaning additions, pergolas, and roof systems must be engineered and permitted to the current wind-speed map — not the code cycle the original home was built under. Homeowners in western Coral Springs ZIP codes that border the Everglades Conservation Area face additional site considerations for drainage and impervious surface coverage that affect pool decks and paver patio permits. Understanding those local review triggers before a permit application goes in is the difference between a smooth approval and weeks of correction cycles.

How One Contractor Covering All Trades Affects Your Coral Springs Project

The typical Coral Springs remodel involves a GC who holds the general license and then subs out plumbing, electrical, and mechanical to separate companies — each with their own schedule, their own permit inspections, and their own communication chain. When a delay hits one trade, the rest of the project stalls while two companies negotiate whose fault it is.

Because Aldo Dellamano holds all five Florida licenses personally — CGC, roofing, mechanical, plumbing, and electrical — the field decisions, inspection scheduling, and scope coordination happen inside one company. That matters most on the projects Coral Springs homes generate most often: a kitchen remodel that uncovers outdated wiring, a bathroom addition that requires a gas line extension, or an HVAC replacement that exposes duct issues requiring structural access. The license breadth means those discoveries get resolved by the same contractor already on site rather than triggering a sub-search mid-project.

Common questions

Do you pull the permits for Coral Springs projects, or is that the homeowner's responsibility?
Dellamano Construction pulls all required permits through Broward County and the City of Coral Springs as the licensed contractor of record. Homeowners are not required to manage any part of the permitting process. We handle the application, plan review coordination, and all required inspections through final sign-off.
My Coral Springs home needs a kitchen remodel, but I suspect the wiring and plumbing are original — can you handle all of it without bringing in outside subcontractors?
Yes. Because the electrical, plumbing, and general contracting licenses are all held personally by the owner, those scopes are performed under one company rather than farmed out to separate subcontractors. For Coral Springs homes from the 1980s and early 1990s, that combination is common — a kitchen remodel frequently opens into a panel upgrade and re-pipe, and having one contractor licensed in all three trades keeps the project on a single schedule.
How does the fixed-bid estimate work for a Coral Springs addition or remodel?
A walkthrough is scheduled at the Coral Springs property so the scope can be assessed in person before any numbers are discussed. Once the scope is defined, the estimate is written as a fixed bid — meaning the price stated in the contract is the price at completion for the agreed scope. Changes to scope are documented through a written change-order process, not discovered at the final invoice.

Start Your Coral Springs Project

Reach out to schedule a walkthrough at your Coral Springs home and get a written, fixed-bid proposal on your scope.

Call (561) 654-7243

Text Aldo Call the office